Jetting for Husqvarna 2T Moto 4+

for TC, TX, TE, CR engines

Ballistic Solutions LLC

Designed for iPad

    • 4.9 • 9 Ratings
    • $5.99

Screenshots

Description

Nº1 jetting App for Husqvarna 2T Bikes (2023 engines included)

2010-2023 models
This app is using temperature, altitude, humidity, atmospheric pressure and your engine configuration for calculate optimal jetting (carburetor configuration) and spark plug to use for Husqvarna 2-strokes MX, Enduro bikes (TC, TX, TE, CR models).

This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet. Internal barometer is used on supported devices for better precision. If more accuracy is needed, a portable weather station can also be used. Application can run without GPS, WiFi and internet, in this case user has to give the weather data manually.

• For each carburetor configuration, the following values are given: main jet, needle type, needle position, pilot jet, air screw position, throttle valve size, spark plug
• Fine tuning for all these values
• History of all your carburetor configs
• Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)
• Selectable fuel type (gasoline with or without ethanol, Racing fuels available, for example: VP C12, VP 110, VP MRX02)
• Adjustable fuel/oil ratio
• Mix wizard to get the perfect mix ratio (fuel calculator)
• Carburetor ice warning
• Possibility of use automatic weather data or a portable weather station
• If you don't want to share your location, you can manually select any place in the world, the carburetor setups will be adapted for this place
• let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg atm for pressures

Valid for the following 2T models from 2010 to 2023:
• TC 50
• TC 50 Mini
• TC 65
• TC 85
• TC 125
• TX 125
• CR 125
• CR 144
• TC 150
• TE 150
• TC 250
• TX 300
• TE 250
• TE 300

The application contains four tabs, which are described next:

• Results: In this tab main jet, needle type, needle position, pilot jet, air screw position, throttle valve, spark plug are shown. These data are calculated depending on the weather conditions and the engine configuration given in the next tabs.
This tab lets do a fine tuning adjustment for all this values to adapt to the concrete engine.
Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE- relative horsepower, volumetric content of oxygen, oxygen pressure are shown too.
On this tab, you can also share your settings with your colleagues, or add settings to your favorites.
You can also see in a graphic form the calculated ratio of air and fuel (lambda).

• History: This tab contains the history of all carburetor configurations. If you change the weather, or engine setup, or fine tuning, the new setup will be saved in history.
This tab also contains your favorite settings.

• Engine: You can configure in this screen the information about the engine, that is, engine model, year, spark manufacturer, fuel type, oil mix ratio.

• Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.
Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
In addition, this application can work with a pressure sensor built into the iPhone. You can see if it is available on your device and turn it on or off.
Also, on this tab, you can manually select any place in the world, the carburetor setups will be adapted for this place.
Moreover, on this tab, you can enable alerts about possible carburetor icing.


If you have any doubt about using this App, please, contact us. We answer every question, and we take care of all comments from our users to try to improve our software. We are also users of this application.

What’s New

Version 2.3

• Now you can choose models from 2010 to 2023 year
• New models are added - TC50, TC50 Mini, CR125, CR144, TC150
• Added new feature: get weather (temperature, pressure, humidity) via Bluetooth using weather stations: Kestrel DROP, Kestrel 5x00, WeatherFlow WEATHERmeter, Skywatch BL
• Added new feature: added the ability to calibrate the barometer built into your phone or tablet (go to the “Settings“ tab, then “Measurement units“)
• Added new feature: added various utilities (unit converters) (go to the “Settings“ tab, then “Utils“)
• We have improved our weather calculator significantly. Now you can manually select which type of atmospheric pressure you are working with (for example if you use portable barometers, weather stations):
- sea level pressure QNH
- sea level pressure QFF
- station pressure (barometric pressure)
• Some carburation recommendations have been slightly revised for better performance. Therefore, we strongly recommend that you check the fine tuning sliders, you may need to change them
• Now you can see size of Throttle Valve for each carburation recommendation on the 'Results' tab
• New type of fuels have been added: VP Racing C12, VP Racing 110, VP Racing MRX02, gasoline with ethanol
• On the results tab, click on the drop-down menu 'Weather (AirLab)', new data for tuners are available: Air Density, Relative Air Density, Density Altitude, Station Pressure, SAE - Dyno Correction Factor, SAE - Relative Horsepower, Volumetric Content Of Oxygen, Oxygen Pressure
• Improved functionality for the feature 'Weather for custom location'. We added a search bar where you can enter the location name. Search places easier and faster now
• Improved functionality and accuracy of fuel calculator
• Bug fixes for 'share setup with friends' feature
• Fixes for showing 'Carburetor icing alert', now it doesn't overlap other content
• We reworked the altitude determination algorithm for the 'weather for custom location' feature. We hope that now, if you manually selected your location, the altitude will be calculated with much greater accuracy

Ratings and Reviews

4.9 out of 5
9 Ratings

9 Ratings

Wish it ain't so ,

Great app for two stroke tuning

This app takes out the guess work and provides a great starting point when riding in different areas.
It takes a little bit of playing around to learn how to use it. But overall I’m super happy with it.

Robbert Bobbert ,

Best

Power feels great with base setups for my weather and location.

Richard Dybdah ,

Must have

Must have for beginners.

App Privacy

The developer, Ballistic Solutions LLC, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.

Data Not Linked to You

The following data may be collected but it is not linked to your identity:

  • Diagnostics

Privacy practices may vary, for example, based on the features you use or your age. Learn More

Supports

  • Family Sharing

    Up to six family members can use this app with Family Sharing enabled.

More By This Developer

Chairgun Elite Ballistic Tool+
Sports
Air Density & Altitude: AirLab
Sports
Chairgun Elite Ballistic Tool
Sports
Jetting for KTM 2T Moto
Sports
Jetting Yamaha YZ 2T Moto
Sports
AirLab: Air Density & Altitude
Sports

You Might Also Like

Jetting for Husqvarna 2T
Sports
Jetting for KTM 2T Dirt Bikes
Sports
Jetting for Yamaha YZ 2T bikes
Sports
Jetting for Honda CRF 4T bikes
Sports
Jetting for Kawasaki KX
Sports
Ride Husqvarna Motorcycles
Sports