testo Smart 4+
Fast and reliable measurements
Testo SE & Co. KGaA
Designed for iPad
-
- Free
- Offers In-App Purchases
Screenshots
Description
- All in one: The testo Smart App guides you easily and quickly through measurements on refrigeration, air conditioning and heating systems, air flow, and many more applications.
- Fast: Graphically descriptive display of measured values, e.g. as a table, for quick interpretation of results.
- Efficient: Create digital measurement reports including. photos as PDF/ CSV files on site and send them via e-mail.
NEW in the testo Smart App:
- Multi-site measurement PRO measurement program: With this first-class measurement program, you can create professional documentation of your measured values at different measurement sites.
- Air balancing PRO measurement program: Accelerate your workflow and eliminate errors: The new measurement program 'Air balancing' brings you more efficiency and speed in the commissioning and adjustment of ventilation and air-conditioning systems (especially for balanced ventilation systems).
The testo Smart App is compatible with the following Bluetooth®-enabled measuring instruments from Testo:
- All Testo Smart Probes
- Digital manifolds testo 550s/557s/550i/570s and testo 550/557
- Digital refrigerant scale testo 560i
- Vacuum pump testo 565i
- Flue gas analyzer testo 300/310 II/310 II EN
- Vacuum gauge testo 552
- Clamp meter testo 770-3
- Volume flow hood testo 420
- Compact HVAC measuring instruments
Applications with the testo Smart App
Refrigeration systems, air conditioning systems and heat pumps, heating systems, indoor air quality:
- Leak test: Recording and analysis of the pressure drop curve.
- Superheat and subcooling: Automatic determination of condensation and evaporation temperature and calculation of superheat / subcooling.
- Target superheat: Automatic calculation of target superheat
- Automatic refrigerant charging by weight, by superheat, by subcooling, and by target superheat
- Vacuum measurement: Graphical progress display of the measurement with indication of start and differential value
Indoor air quality and comfort level:
- Temperature and humidity: Automatic calculation of dew point and wet bulb temperature
Ventilation systems:
- Volume flow: After the intuitive input of the duct cross-section, the app calculates the volume flow fully automatically.
- Diffuser measurements: simple parameterisation of the diffuser (dimensions and geometry), comparison of the volume flows of several diffusers when setting up a ventilation system, continuous and multi-point average calculation.
Heating systems:
- Flue gas measurement: Second screen function in combination with testo 300
- Measurement of gas flow and static gas pressure: Also possible parallel to the flue gas measurement (delta P)
- Measurement of flow and return temperatures (delta T)
---------------------------------------------------------
Terms of Use:
https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
Privacy Policy:
https://www.testo.com/en/company/privacy-policy-app
What’s New
Version 24.0.10
- Camera live view in the "Mould indication" measurement program
- Connection to the new testo 565i vacuum pump
- Connection to the new testo 310 II EN flue gas measurement instrument
- Possibility to receive push notifications and in-app notifications
- Various minor bugs have been fixed
Ratings and Reviews
App can’t remember it’s installed weak Bluetooth range.
As with many other frustrated users. After using the old app successfully for years. I removed then replaced the old "testo Smart Probe App" with the new "testo Smart App". As other users stated. Once launched, It continues to ask you to install the new app. Clicking on install, takes you back to Apple apps which then gives you the option to open the app. This occurs every thine the app is opened. Also when using the 605i (even with fresh batteries). Bluetooth range averages 7-8 feet. It’s as if the refer walls are blocking the signal. Paid hundreds of dollars for the Testo kit with (1) 605i, (2) 549i. Having not used the 549i yet. I’m sure their quality… Though, did I make the wrong choice of equipment, due to poor software design. Their useless without the integration.
Developer Response ,
Hello, We apologise that you are having problems with the app. So could you please try the following: 1. Deinstall proper all the Apps, means "testo Smart Probes" and also "testo Smart". 2. Now install the "testo Smart App" freshly from the Apple App Store. Does it now work? (no messages again to install the new App)?
Could you please tell us the partnumber of your Smart Probes? The "old" Smart Probes have a lower BT range than the "new" Smart Probes. Best regards, Testo App Team
Needs work, but good.
I’d rate it a full five stars but while in refrigeration measurement you cannot record either supply, return or ambient at the same time.
If I can add this to my field report, which is honesty way nicer than the fieldpiece job link app, I’d change this to five stars.
It is however a very nice software to record real time data for customers and the graphs really do help you catch problems the naked eye normal wouldn’t see. There’s also different measurements that make this the best hvac app in the trade.
Good tools, good app with a major problem
Hello,
I am an HVACR student in college and use Testo probes. Overall I love the tools themselves however as other students began to buy and use their own a major issue has arisen. The Testo app scans for probes to connect to in the background, normally if your the only one with probes this isn’t an issue. However if someone within range (ie 10’ away) is also using Testo probes, the app will also try to connect to his/her probes and their phone to your probes. As far as I know there is no way to turn this automatic scanning and connecting off.
Please Testo update the app to allow users to toggle discovery of new probes. Or at least blacklist new probes so that the app will not try to connect to 14 other peoples probes.
Developer Response ,
Hello, you are right, this is a bit of a hassle. But you can switch in the sensor list (main menu entry "Sensors") between allow connection or not. We hope this helps in the first instance. Nevertheless we are working on this topic right now to make it more intuitive. So please stay tuned. Best regards, the Testo App Team
App Privacy
The developer, Testo SE & Co. KGaA, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer’s privacy policy.
Data Not Linked to You
The following data may be collected but it is not linked to your identity:
- Location
- Identifiers
- Usage Data
- Diagnostics
Privacy practices may vary, for example, based on the features you use or your age. Learn More
Information
- Seller
- Testo SE & Co. KGaA
- Size
- 118.9 MB
- Category
- Productivity
- Compatibility
-
- iPhone
- Requires iOS 14.0 or later.
- iPad
- Requires iPadOS 14.0 or later.
- iPod touch
- Requires iOS 14.0 or later.
- Mac
- Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
- Apple Vision
- Requires visionOS 1.0 or later.
- Languages
- Age Rating
- 4+
- Copyright
- © 2020 Testo SE & Co. KGaA
- Price
- Free
- In-App Purchases
-
- Multi-site measurement $6.99
- Air balancing $9.99
- Multi-site measurement $69.90
- Air balancing $99.90